Laser engraving machine laser tube installation requirements

When we install the laser tube, if we ignore some important details, it will bring inconvenience to the adjustment of the light path in the future.

The following will introduce the laser tube installation requirements.

First of all, according to the length and diameter of the laser tube, choose the right laser clamp.

In addition, the laser tube clamp installation position must be determined. The laser tube clamp should hold one quarter of the laser tube, and then place the laser tube clamp on the laser tube seat. In order to facilitate the adjustment of the position of the laser tube, the strip mouth of the laser tube clamp should be on both sides.

Do not drill all the holes when drilling and tapping on the laser tube socket. Drill the area with the strip mouth and then place the laser tube clamp. The monofilament is fixed and the laser tube is installed for pre-commissioning to ensure the laser tube. The position is not much biased. After fixing, fix the laser clamp with four screws.

In addition, after the laser tube is on the laser tube rack, the water inlet should face down and the water outlet should face upwards.

Finally, the laser tube is debugged by the optical circuit. If there is a deviation, the laser tube can be fine-tuned by adjusting the gasket.

The above is the laser engraving machine laser tube installation requirements brought by Xiao Bian.