After the “Shenzhen Sports Car Brake Case†occurred, the traffic control departments of various cities also increased their review of modified cars. How could the modified vehicles pass the annual review has become a concern for many people. The appearance of the car is not the best modification through the annual review, whether it is to change the color of the car or film for the car are not allowed. From this point of view, it seems that it is very difficult for a modified vehicle to avoid the restricted area. Therefore, many people gave up the idea of ​​a modified car. In fact, the modification itself is not as difficult as it seems. Judging from the situation in recent years, there are no clear provisions in the relevant areas to stipulate what kind of modified vehicles are considered to be in compliance with national laws. If you want to successfully pass the annual inspection, what aspects of the refitting conditions need to be turned into a key issue. The following describes the performance modification that can be passed through several aspects of the annual review. 1. Modification of the brake Replacing the brake pads will not only improve the braking performance, but also increase the possibility of passing the annual inspection. The brake pad material is mainly composed of metal, rubber, non-asbestos, ceramics and carbon in a certain proportion. Properly increasing the proportion of non-asbestos can improve the comfort of use, in order to be more flexible in the process of use, according to a certain proportion to change the brake pad material, so as to make the operation more convenient. If the pursuit of efficient and convenient results, in the braking process, the converter can also add other types of metal in their own brake pads. This will not only improve the performance of the brake pads through annual review. 2. Modification of the power system As we all know, engine oil plays a decisive role in the efficient operation of the engine system. It requires the use of high-performance, fully-combined engine oil, which can speed up the engine's operation and protect the performance of the engine. At the same time, it enhances the dynamic feeling of driving. Ensure the safety of the conversion. 3. Modification of the wheel If the rims are too large, this will cause modified cars to fail to pass the annual review. Even so, many owners only prefer the wheels of more individualized ostentation. In fact, many stern staff do not allow non-original wheels, so to be on the safe side, Finally, the rims sold by the original manufacturer were used. 4. Modification of chassis suspension Enhance the rigidity of the chassis can improve handling performance, while many owners of automotive performance requirements are very high, they are more inclined to modify the chassis by adding a chassis to strengthen the lever. In order to play a proper role, when anti-roll bars are installed, they must be installed together with the suspension. At the same time, the converted suspension must be the same as the height of the original car. The above several aspects of the modification are to make further modifications to the vehicle while ensuring the basic performance of the components, and of course, to a certain extent, improve the possibility of passing the annual review. Arm System Parts,Aluminum Alloy Casting,Aluminum Alloy Casting Part,Gravity Aluminum Alloy Casting Parts Zhejiang Noken Mechanical Technology Co., LTD , https://www.nkcasting.com
