| ITEM | WSM-160 | WSM-180 | WSM-200 |
| Rated supply voltage(V) | 230 | 230 | 230 |
| Supply frequency(Hz) | 50/60 | 50/60 | 50/60 |
| Rated input capacity(KVA) | 3.3 | 4 | 4.5 |
| No-load voltage(V) | 56 | 56 | 56 |
| Current range(A) | 25-160 | 25-180 | 30-200 |
| Rated duty cycle(%) | 60 | 60 | 60 |
| Usable electrode(mm) | 1.6-4.0 | 1.6-4.0 | 1.6-4.0 |
| Insulation class | H | H | H |
| Weight(kg) | 10 | 10.5 | 10.5 |
| Machine size(mm) | 370*153*240 | 370*153*240 | 370*153*240 |
1.Inverter technology MOSFET switch,optional for TIG and TIG/MMA welding process.with pulse function.
2.Compact design and energy saving.
3.Single phase input power supply,DC output,welding current can be precisely controlled.
4.Excellent HF(high frequency)arc starting,deep penetration,strong compensation.
5.Auto Protection of anti-stick,over-heat and over current.
| ITEM | WSM-160 | WSM-180 | WSM-200 |
| Rated supply voltage(V) | 230 | 230 | 230 |
| Supply frequency(Hz) | 50/60 | 50/60 | 50/60 |
| Rated input capacity(KVA) | 3.3 | 4 | 4.5 |
| No-load voltage(V) | 56 | 56 | 56 |
| Current range(A) | 25-160 | 25-180 | 30-200 |
| Rated duty cycle(%) | 60 | 60 | 60 |
| Usable electrode(mm) | 1.6-4.0 | 1.6-4.0 | 1.6-4.0 |
| Insulation class | H | H | H |
| Weight(kg) | 10 | 10.5 | 10.5 |
| Machine size(mm) | 370*153*240 | 370*153*240 | 370*153*240 |
1.Inverter technology MOSFET switch,optional for TIG and TIG/MMA welding process.with pulse function.
2.Compact design and energy saving.
3.Single phase input power supply,DC output,welding current can be precisely controlled.
4.Excellent HF(high frequency)arc starting,deep penetration,strong compensation.
5.Auto Protection of anti-stick,over-heat and over current.
Wuxi Yuda Polyethylene Welder can meet ISO21307 welding standard. There is a need to examine current practice on a global scale and establish the best procedure(s) for the highest-quality, most reliable and efficient construction of PE butt fusion systems for gas and water distribution.
There are 3 following types of butt fusion welders to meet the standard ISO 21307 : 1. Single Low Pressure Fusion Jointing Welding Machines 2. Double low-pressure Fusion Welders 3. Sigle High Pressure Plastik Welding Equipment. As shown in the graphs of the various systems, the high pressure method of butt welding takes less time to make a weld than low pressure welding fusion. This is a very important factor in lowering the cost of installation, since the cycle times necessary for butt welding large diameter pipes are long. Using the high pressure poly welders means that daily productivity can be significantly increased. Here you can choose relevant SHP series high pressure hdpe welding machines from 40mm-1600mm.
High Pressure Plastic Welding Machine,Butt Fusion Welding,Fusion Welding Machine,Plastic Pipe Welding Machine
WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.pipefusionweldings.com