Color Wrap Film for car body wrapping have gloss,matte, metallic,chrome, chameleon,diamond,holographic,brushed finish and all car color wraps with imported Ishland glue and diamond air channels with good stretchable,very good to install and last long time outside over 3-5 years.
1.Water Resistant and UV Protected.
1. Clean off any dust, dirt or wax or other things before installation.
2. Measure the amount of protective film needed for the part to be fixed.
3. There is a transparent protective film on the surface which must be peeled off before use.
4. With a hair dryer, let the film be flexible and reduce wrinkles.
5. Even though it is waterproof, it cannot be completely submerged in water.
6. After assembly, please leave the car under the sun within 48 hours or do not wash the car in the meantime. Do not let the car stickers touch the water after installation for 48 hours.
Matte Car Wrap,Car Wrap Film,Car Wrapping Film,Gloss Car Wrapping,Car Wrapping Vinyl Guangzhou Fuyulai Technology Co.,Ltd , https://www.fuyulaifilm.com
hardening depth 1-3mm, recommend you high frequency 10-50KHZ induction quenching machine
Hardening depth 3-8mm, recommend you medium frequency 2-10khz induction quenching machine
Advantages of induction quenching machine
Heat Treatment (surface quench):
It is mainly aims to change the rigidity of the metal materials through the heat treatment to work pieces. Detail applications are stated as follows: Â
1. Quenching for various hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear (orchard shear).
2.Quenching for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, semi drive shaft, small shaft and fork.
3. Various electric tools, such as gear and axes.
4. Quenching for machine tools, such as lathe deck and guide rail.
5. Quenching for various hardware metal parts and machined parts, such as shaft, gear (chain wheel), cam, chuck and clamp etc.
6. Quenching for hardware molds, such as small-size mold, mold accessory and inner hole of mold.
Technical parameters of induction hardening machine
Power
140KW
160KW
200KW
Voltage
320-420V
320-420V
320-420V
Max. currentÂ
A240
280
360
Oscillation frequency
2-10KHZ
2-10khz
2-10khz
Forging rod diameter
10-70mm
10-70mm
10-70mm
Hardening depth
3-8mm
3-8mm
3-8mm
Heating weight/minute
6kg
8kg
10kg
Required Water pump power
1.5kw
2kw
2kw
Generator size
1720*680*680mm
 1720*680*680mm
1720*680*680mm
transformer size Â
900*550*600mmÂ
 900*550*600mmÂ
900*550*600mmÂ
Water cooling temperatureÂ
protect point below 50 degreeÂ
below 50 degree
below 50 degree
CNC roller/shaft quenching machine tool
CNC shaft/roller quenching machine tool has the following features:Â
  1, the machine uses PC-industrial digital control systems, high performance, debug and easy to use, to the greatest degree of quenching the workpiece to meet the complex needs.Â
  2, the machine can achieve quenching mode: continuous scan quenching, and quenching, sub-continuous scanning quenching (by the level of sub-setting, no limit switch, the same below), while sub-quenching.Â
  3, this machine is suitable for the typical artifacts (in the appropriate size range) axis: a variety of shaft, step shaft, gear shaft, cam shaft, axle, the cylindrical disk-type parts, end so on.Â
  4, the machine control system for reserve electrical heating and cooling water quenching control interface. According to the process of quenching process and the need to control the cooling process.Â
  5, low running costs. Just run the workpiece drive motor 250W, machine power consumption less than one-fifth of machinery and equipment.Â
  6, the fuselage structure by profile, low cost, light weight, economical and practical.Â
  7, easy maintenance, low failure rate, no leakage.Â
  8 high degree of automation and production efficiency.Â
  9, rail uses linear bearings, high precision, small friction, long life.Â
  10, with heavy equipment through the sprocket, chain balance the weight.Â
Technical parameters of CNC roller/shaft quenching machine tool
Model
TD-1500
Max .hardening length
1500mm
Max tacital diameter
500mm
workpiece moving speed mm/s
2-60
rotation speed r/min
30-150mm
tips moving speed mm/min
480
work piece
150kg
input voltage
two phase 380V
Totally motor power
1.5KW
quenching work piece station
single
FAQÂ
1. What's your MOQ?
For now, we have not yet strict policy about the quantity. Any quantity will be OK.
2. Can you send me similar video for my application?
Yes. We have many machine working onsite videos. Such as brazing, forging, hardening, shrink fitting, etc.Â
Also according to your your work pieces, we can send you similar video for reference.Sometimes, we can send the same work piece heating video,then,you will see the whole heating or production process.
3. I am new , about this product
It doesn't matter. We have experienced sales and professional engineer , communicated and guide you. We will design and recommend you the suitable machine model (power and frequency, coils). Usually, you just need tell us your work pieces' specifications and heating requirements, or detailed applications.
4. Can you make special coils for my work piece?
Yes. Usually we provide 2 piece of coils, together with the machine.
5. Can we have extra induction coils ?
Yes. We can tailor-made extra coils, if you need. While you only need pay very low cost,factory price.
Our workshop: debug induction quenching machine
We offer complete service :Â
Before sales
Our professional technical recommend the right machine,and can also customized special machine as customer's requirement and special parts.
Sales following
During machine production, watching the machine quality and testing machine.and take pictures or make video for customer checking.
After Sales
Machine have one year quality warranty ,0ne year free replacement spare parts ( 1 set of spare parts free for your stock, in case it need replacement).
Supply pictures or video help customer to install machine.
Provide long-terms technical support.
Â
hardening depth 1-3mm, recommend you high frequency 10-50KHZ induction quenching machine
Hardening depth 3-8mm, recommend you medium frequency 2-10khz induction quenching machine
Advantages of induction quenching machine
Heat Treatment (surface quench):
It is mainly aims to change the rigidity of the metal materials through the heat treatment to work pieces. Detail applications are stated as follows: Â
1. Quenching for various hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear (orchard shear).
2.Quenching for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, semi drive shaft, small shaft and fork.
3. Various electric tools, such as gear and axes.
4. Quenching for machine tools, such as lathe deck and guide rail.
5. Quenching for various hardware metal parts and machined parts, such as shaft, gear (chain wheel), cam, chuck and clamp etc.
6. Quenching for hardware molds, such as small-size mold, mold accessory and inner hole of mold.
Technical parameters of induction hardening machine
Power
140KW
160KW
200KW
Voltage
320-420V
320-420V
320-420V
Max. currentÂ
A240
280
360
Oscillation frequency
2-10KHZ
2-10khz
2-10khz
Forging rod diameter
10-70mm
10-70mm
10-70mm
Hardening depth
3-8mm
3-8mm
3-8mm
Heating weight/minute
6kg
8kg
10kg
Required Water pump power
1.5kw
2kw
2kw
Generator size
1720*680*680mm
 1720*680*680mm
1720*680*680mm
transformer size Â
900*550*600mmÂ
 900*550*600mmÂ
900*550*600mmÂ
Water cooling temperatureÂ
protect point below 50 degreeÂ
below 50 degree
below 50 degree
CNC roller/shaft quenching machine tool
CNC shaft/roller quenching machine tool has the following features:Â
  1, the machine uses PC-industrial digital control systems, high performance, debug and easy to use, to the greatest degree of quenching the workpiece to meet the complex needs.Â
  2, the machine can achieve quenching mode: continuous scan quenching, and quenching, sub-continuous scanning quenching (by the level of sub-setting, no limit switch, the same below), while sub-quenching.Â
  3, this machine is suitable for the typical artifacts (in the appropriate size range) axis: a variety of shaft, step shaft, gear shaft, cam shaft, axle, the cylindrical disk-type parts, end so on.Â
  4, the machine control system for reserve electrical heating and cooling water quenching control interface. According to the process of quenching process and the need to control the cooling process.Â
  5, low running costs. Just run the workpiece drive motor 250W, machine power consumption less than one-fifth of machinery and equipment.Â
  6, the fuselage structure by profile, low cost, light weight, economical and practical.Â
  7, easy maintenance, low failure rate, no leakage.Â
  8 high degree of automation and production efficiency.Â
  9, rail uses linear bearings, high precision, small friction, long life.Â
  10, with heavy equipment through the sprocket, chain balance the weight.Â
Technical parameters of CNC roller/shaft quenching machine tool
Model
TD-1500
Max .hardening length
1500mm
Max tacital diameter
500mm
workpiece moving speed mm/s
2-60
rotation speed r/min
30-150mm
tips moving speed mm/min
480
work piece
150kg
input voltage
two phase 380V
Totally motor power
1.5KW
quenching work piece station
single
FAQÂ
1. What's your MOQ?
For now, we have not yet strict policy about the quantity. Any quantity will be OK.
2. Can you send me similar video for my application?
Yes. We have many machine working onsite videos. Such as brazing, forging, hardening, shrink fitting, etc.Â
Also according to your your work pieces, we can send you similar video for reference.Sometimes, we can send the same work piece heating video,then,you will see the whole heating or production process.
3. I am new , about this product
It doesn't matter. We have experienced sales and professional engineer , communicated and guide you. We will design and recommend you the suitable machine model (power and frequency, coils). Usually, you just need tell us your work pieces' specifications and heating requirements, or detailed applications.
4. Can you make special coils for my work piece?
Yes. Usually we provide 2 piece of coils, together with the machine.
5. Can we have extra induction coils ?
Yes. We can tailor-made extra coils, if you need. While you only need pay very low cost,factory price.
Our workshop: debug induction quenching machine
We offer complete service :Â
Before sales
Our professional technical recommend the right machine,and can also customized special machine as customer's requirement and special parts.
Sales following
During machine production, watching the machine quality and testing machine.and take pictures or make video for customer checking.
After Sales
Machine have one year quality warranty ,0ne year free replacement spare parts ( 1 set of spare parts free for your stock, in case it need replacement).
Supply pictures or video help customer to install machine.
Provide long-terms technical support.
Â
2.Invisible Air-Release Channel, easily get rid of bubbles during installation.
3.Strong self adhesive, eliminate bubbles, peel and stick application.
4.Gloss and smooth finish.
5.Stretchable with heat.
6.Easy to clean with soap and water.
7.Long lasting for approximately 5 years indoor use and 3 years outdoor use.
8.It can also be applied onto most smooth painted or metalized surface such as cell phone, laptop, home appliances, table and even cabinet and much more.
Installation Tips
Model NO.: IGBT140KW/2-10KHZ
Cooling: Water Cooling
Work Time: 24 Hours Continuously Work
Energy Consumption: Save 30% Electricity
Envionmental: No Pollution
Experience: Over 6 Year Export Experience
Market: Southeast Asia, Middle East, Russia, Europe etc,
Transport Package: Standard Wooden Cases for Packing Induction Heater
Specification: 1.7CBM
Origin: China
HS Code: 8514400090
Model NO.: IGBT140KW/2-10KHZ
Cooling: Water Cooling
Work Time: 24 Hours Continuously Work
Energy Consumption: Save 30% Electricity
Envionmental: No Pollution
Experience: Over 6 Year Export Experience
Market: Southeast Asia, Middle East, Russia, Europe etc,
Transport Package: Standard Wooden Cases for Packing Induction Heater
Specification: 1.7CBM
Origin: China
HS Code: 8514400090
Magnetic Induction IGBT High Medium frequency shaft/roller quenching machineÂ
Shaft /Roller induction quenching machine Magnetic Induction IGBT High Medium frequency shaft/roller quenching machineÂ
Shaft /Roller induction quenching machineÂ