With the gradual entry of new energy vehicles into the market, it has become a family mobility vehicle that many families will choose. Relative to traditional automobiles, the number of new energy vehicles is relatively small, so the models are not rich enough when choosing a car, and there is not much difference between the independent brands in terms of interior and configuration. Therefore, when a car is purchased, what each family cares about is “ "Points" are not the same, but new energy vehicles will also encounter many of the same problems during their use. Let's talk to you today about the things that need attention in the use of new energy vehicles.

buy

When purchasing a new energy model, it is necessary to have a fixed parking space in the community, or have a long-term parking license to purchase new energy vehicles. In some old communities, it might not be possible to leave the gaps in the charging piles where it was originally compact, and in the old community, the voltage distribution is relatively low and no more voltage can be allocated to New energy models are charging, so if you can see new energy vehicles charging in the old community, it is really rare. The main reason for the installation of charging piles in residential parking spaces is that the property company will think that the installation of charging piles in the parking spaces of vehicles will affect the fire inspection standards, and will refuse the construction of charging piles; secondly, once the charging piles are completed, they will be charged during vehicle charging. In the event of an accident, it is difficult to decide when the responsibility is divided.

Buying electric cars in Beijing requires a shake. Its application qualifications are the same as those for the purchase of fuel vehicles. Namely, there are no passenger cars registered in Beijing with a valid motor vehicle driver's license, and one of the following conditions can be met: Active servicemen and current armed policemen stationed in Beijing; Non-resident registration personnel with valid Beijing Work Residence Permit; Hold valid temporary residence permit for this Municipality and pay social insurance and personal income tax in this Municipality for more than five consecutive years. Non-resident registration personnel; foreigners who have lived in Beijing for more than one year and Hong Kong, Macao and Taiwan personnel.

New energy vehicles are relatively smooth on the road, and most of the vehicles are divided into three gears: forward gear, neutral gear, and reverse gear. The speed of the electric vehicle starts to accelerate faster. The driver should pay attention to the good speed at the start, but the speed is not enough. It is still far lower than the conventional car at the time of lane changing and overtaking. However, electric cars do not have the roar of traditional car engines, so they are quiet, quiet and comfortable. The main noise comes from tire noise and wind noise.

Charging

The new energy vehicle users in the north will first consider the problem of charging their cars for the winter. In the winter in the north, when the parking space is outdoors, the nighttime temperature will drop to minus 20 degrees Celsius. In theory, when the temperature is minus 20 degrees, the charging pile can be used to charge and discharge normally. However, during low temperature charging, the electrolyte of the rechargeable battery is prone to crystallization and affects the service life of the battery. In normal use, it is also necessary to accurately grasp the charging time according to the actual situation, with reference to the frequency and mileage used normally, to master the charging frequency, try not to charge after a short driving time. Charging time should not be too long when charging, too long time easily make the battery heat, greatly shortening the battery life, the average battery charge time is about 8-10 hours. If the battery temperature is too high during charging, charging should also be stopped immediately.

Almost all pure electric vehicles are divided into fast charging and slow charging. When the rapid charging is performed, the voltage and current output will be too high, and the battery will have obvious heating. There is a certain loss in the electric vehicle battery and the battery life is reduced. In non-emergency situations, for the sake of protecting the battery, it is best to use slow charging to minimize the number of quick charging.

After purchasing a new energy vehicle, the first thing to do is to go through the charge cards of various companies. This is a problem that many new energy vehicle owners will encounter because the uncertainty of the driving distance will lead the driver to not know where to go. To charge their own cars, so when they come out at home often carry a card package, which is loaded with the charge card company's charge card. Charging pile models are different in different areas, so it is virtually inconvenient for owners of new energy vehicles.

Beijing is now a popular charging station charging company for the national grid, a high degree of popularity, when handling the prepaid card I need to carry the original ID card, motor vehicle driving license and motor vehicle driver's license to the State Grid Business Office or power supply for processing, the amount of recharge is not However, although the ID card is used to handle the card, if the card is lost or damaged, the card cannot be used for the time being. Therefore, everyone should also cherish their own recharge card. And when using it should also be noted that: Because the technology is not mature enough, sometimes the password is entered incorrectly, the balance is insufficient and the card is locked when the charge is over and forgets to settle. When this happens, please go to the nearest The State Grid Business Office understands the card and may charge corresponding fees when the card is released. (An ID card of the State Grid can handle up to five cards at the same time, providing convenience for unlocking the card users immediately.) Another type of card of the State Grid is an expressway charging card, which can only be used for highway charging, but it is not currently available. Handle individual users.

Putian New Energy Electric Card is applicable to charging piles established by Putian New Energy Company. Charging piles also have DC piles and AC piles. The method of handling can be selected from the company's business office, the online business office and the telephone, and the business office needs to bring along his own ID card, motor vehicle driving license and motor vehicle driving license. There is no minimum amount of recharge. Both the online business office and the telephone transaction can be directly delivered to their own hands by mail. Faster and more convenient.

The e-charging network is a mobile phone client of the Beijing charging pile public service management platform. The e-charging QR code can be found on the charging grid of the national grid. After the scan, 50 yuan is required for pre-authorization (to prevent malicious arrears). Can start charging.

Finally introduced the star charging APP, after the mobile phone scanning code can be used to charge the car, settlement, the biggest benefit of the stars charging is that it can support a mobile phone number can be charged for multiple vehicles, so peers can not be in the car When you are charging, your strong support will believe that you will be grateful for your peers.

use

Traditional gasoline vehicles are used to hot cars in the winter before they go. Does the new energy vehicle need hot cars? The answer is definitely needed, and new energy vehicles are mainly divided into electric vehicles and hybrid vehicles. The purpose of electric vehicles is not to heat the engine, but mainly to heat the battery, because the battery is extremely cold. In the environment, there may be a phenomenon that does not work, so electric cars also need hot cars, but only need to allow the car to run slowly, you can achieve the purpose of the hot car.

New energy vehicles are still mainly based on electric vehicles, and many people who have intentions to purchase cars will think of another problem, that is, the problem of car washing. Traditional cars cannot wash into the engine compartment when washing cars. When electric cars are washing cars, the current may wash into the battery and cause leakage. In fact, the battery of an electric vehicle is relatively airtight. It is usually placed in the center of the chassis or under the trunk. The position is relatively hidden and there are other parts around, and the battery housing also has corresponding waterproof function. It will not easily cause water in the punching car wash. The occurrence of a dangerous accident. Of course, there is no absolute safety in this matter, because the dealer 4S shop will usually leave an inspection port in order to detect and repair the car problem, so when the squirting water gun directly flushes the inspection port, the possible risk factor will be Greatly improved. Therefore, when washing the car, you can lower the body temperature before flushing. Do not hold the squirting water gun at the charging socket and continue to punch the water to avoid danger. The most important thing is something that needs your attention: Do not clean the interior of the cabin with water!

Compared with traditional automobiles, the maintenance cost of new energy electric vehicles is much less than traditional cars. Normal maintenance is the body routine inspection. Major maintenance usually has brakes, auxiliary oil inspection, battery performance testing, inspection of the most replaced gear oil, but will not involve more complex projects and technologies, so the new energy models in the maintenance Really a great deal.

PVC RESIN SG8

In terms of building materials, industrial products, daily necessities, floor leather, floor tiles, artificial leather, pipes, wires and cables, packaging films, bottles, foaming materials, sealing materials, and fibers, PVC was the world`s largest production of general-purpose plastics, and its applications are very widely. Widely used in all aspects

PVC is a white powder with an amorphous structure. The degree of branching is relatively small. The relative density is about 1.4. The glass transition temperature is 77~90°C. It begins to decompose at about 170°C. It has poor stability to light and heat. After prolonged exposure to sunlight, it will decompose to produce hydrogen chloride, and further automatically catalyze the decomposition, causing discoloration, and the physical and mechanical properties also rapidly decline. In actual applications, stabilizers must be added to improve the stability of heat and light.

The production process of PVC Resin SG8 and PVC RESIN SG5 is basically the same, and the production equipment is exactly the same. The main difference lies in the formulation of additives, polymerization temperature, reaction pressure and so on. The reaction temperature and reaction pressure of SG-8 resin have basically reached the working pressure limit of the polymerizer. The reaction requirements are relatively strict, and the requirements on operation, safety, technology, and personnel quality are more stringent, and the resin quality is more difficult to control.

PVC RESIN SG8,Pvc Resin Sg8,Pvc Resin K58,Suspension Pvc Resin

Henan Shunbang Chemical Industry CO.,Ltd , https://www.pvcresinchem.com