[China Instrument Network Instrument R&D] Recently, the National Major Scientific Instruments and Equipment Development Sub-Project “Radiometer on-the-Fly Velocity Error Authenticating Method Research and Device Development” (hereinafter referred to as “Project”) developed by the Zhejiang Institute of Metrology has been successfully developed. Accepted by the State Administration of Administration.

Relying on the research results of this project, Zhejiang Institute of Metrology was authorized by the type evaluation capability of radar speedometer of Zhejiang Bureau of Quality Supervision in September 2016, and has carried out six batches of type evaluations to assist the China Metrology Institute in the implementation of imported and domestic radar speedometers. Field test 15 batches. At the same time, the project has achieved partial results transformation, provided technical services for 5 automotive radar speedometer manufacturers, and solved 10 technical difficulties.
It is understood that this project mainly studies on-site speed measurement error side verification methods for radar speedometers and develops a radar speedometer on-site speed error side verification device that can effectively ensure the accuracy and reliability of radar speedometer type evaluation field test data and provide an intuitive basis for analyzing speed measurement errors. .

As a provincial-level statutory metrological verification agency, in recent years, the Zhejiang Metrology Institute has vigorously promoted its comprehensive technical capabilities and service capabilities, fully utilized its positive role in modern governance systems, and provided strong support for the economic and social development of Zhejiang. The successful completion of the “research on the method of measuring and verifying the speed of the radar speedometer on-site and the installation of the device” has added to the development of the Metrology Institute.
(Original title: Radar Speed ​​Scientific Research Project has achieved significant results in acceptance)

Pure Metal Powder

Pure metal powder for thermal spray refers to a fine powder made from a single metal, such as aluminum, nickel, or titanium, that is used in thermal spray processes. Thermal spray is a coating technique where the metal powder is heated and propelled onto a substrate to create a protective or decorative coating. The pure metal powder is typically chosen based on the desired properties of the coating, such as corrosion resistance, wear resistance, or thermal conductivity. It is important to use pure metal powder to ensure the coating has the desired composition and performance characteristics.

Tungsten Powder,Plasma Spray Powder,Pure Tungsten Powder,Tungsten Metal Powder

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcthermalspray.com