1, the price and other major projects are online, but there are some details, still have to call to ask clearly. When "We offer absolutely free pick-up" was written on the Internet, when we asked them to pick me up to pick up the car, they would sometimes say too far to come. It turns out that the free pick-up and drop-off of the car rental company is conditional and it is necessary to be the nearest car dealer to your home. But if we want to have a car, only this branch has, Oh, blame yourself!


2, insurance, we must carefully consider how much it is.


3. There are no restrictions on the number of kilometers per day that can be traveled in Ontario. However, the daily limit for leaving or exiting the country is 200 kilometers, which exceeds the 0.20 knife/km.


In addition, if another company pays for the CDW insurance provided by the car rental company, it is out of the car accident and is stolen. No responsibility is paid, and the responsibility is also borne by the car rental company (even if you are responsible for the accident, you will not be added to the premium). If you use the CDW provided by your car's insurance or gold card, the liability is also borne by the insurance company, but if you are the person responsible for the accident, the insurance premium for your car will increase next year. Therefore, if you are a novice car rental, it is best to buy a car rental company's CDW, otherwise, there is no need to waste this money, all the visa gold card can basically Cover CDW, there are several banks of gold or free annual fee.


4, car rental must be predetermined. If you go to book one or two days before the weekend, the price must be very high. If you are a week or two earlier, there will be a big difference. If you want to cancel after booking, just go online and cancel it without any cost.


5, large companies are still relatively reliable. For example when returning a car, Avis will only take a meter to measure it, and it will not start. The surface is just a simple look. The National car simply simply forwards and retreats in the parking lot. If there is something wrong, it is not always possible to check it out. This is undoubtedly beneficial to us.


Hertz, National, and Alamo are people's car rental companies that are often chosen, but if you go outside, it is recommended that you go to the latter two rents because their car is basically unlimited mile, while Hertz has restrictions, 300 a day, 200 places, although Hertz's models are more choices. In addition, if you have a Royal Bank visa, you can get a 15% off discount at Nationalcar rental. If you have an Aeroplan card, you can choose to see your own mileage by giving you miles in Hertz. If you rent a car with G2, if you do not have VISA insurance, buy it yourself. Usually you need to pay a premium of about $15-$25 a day.


The process of renting a car is actually very simple. To get there, choose a car, set a time, choose insurance, sign and take the keys. General urban car dealers closed early on weekends, and some closed at noon, and some simply did not open, arrange a good return time. If you are near the airport, you can consider the airport car rental, which is generally 24 by 7. If there is an accident with a rental car, will the insurance cost of the renter be affected? If you purchased the insurance of the rental company (15-20 days), you do not have to bear any responsibility, but if you use your own insurance or use a credit card COVER An accident will affect your future insurance.


Enterprise, Hertz, and AVIS are big car rental companies, and Budget's price is good. If you are not familiar with life, you can consider a car with satellite navigation, but the price may be more expensive. If you are limited to mileage, you must check your mileage in person.


Canada's major car rental companies


DiscountCar

DiscountCar's One Two Free weekend car rental plan is the cheapest. The weekend here refers to Friday to Monday. Rent two weekends (6 days), the third weekend (3 days) is free, about 20 knife a day or so. Discount's weekend price is about $15/day, but it must be rented for three days and it must not exceed 200 kilometers per day. Personal feeling AVIS and HERTZ are better. 1. Good condition and high configuration; 2. Can be rented on a single day to DISCOUNT. Telephone booking does not accept G2, but online booking is OK.

Website: http://


AVIS

To AVIS to rent, they are the US chain, anywhere you can rent a car to return the car, do not limit the number of kilometers, the car is very new, and facilities are complete, automatic door locks, CD, also enjoyed a low-cost car did not give luxury When a model car was returned, it was not very careful when it was returned. The HERTZ car was also new enough. However, it was felt that the Indians in the office were workshops. The appearance of the car was irregular, the inspection of the car was very fine, and the oil was also checked very finely. .

Website: http://


Enterprise

Enterprise's car is the worst, the facilities are simple, there is no CD, everything is manual, the same level of the car is smaller than other cars, also check the car is fine, once above a mud, hard to say is hung up . Later, I asked them their manager and touched it, saying nothing. The only benefit is cheap. The lowest price is for Enterprise but note that it does not exceed the 200 km limit one day. Enterprise Weekend rent for 3 days is 9.99 yuan/day,economy car. With creditcard cover insurance, only 35.85 yuan for 3 days.

Cut To Length Line Machine

Process

The sheet is processed in the following steps: decoil the raw material, feed with a fixed length via the servo motor, shearing it with various shearing tools into sheets of various types according to the drawing and then piling them on the stacking table via the conveying mechanism and the arranging mechanism.

Functional features:

1. This device can complete automatic production of various sheets for laminated, Full tapered seam cores.

2. Shearing power: imported electrical servo control technology is adopted, so the device is featured by high speed, low noise and long life.

3. Feeding power: adopt high torque AC synchronous servo motor, so has characteristics such as rapid response, high positioning and accuracy, low noise, low braking thermal loss and long life.

4. Track positioning: the centralized positioning is achieved by dragging the linear tracks of the ball screw with a servo motor. So the positioning is rapid, accurate and convenient and the track width can be memorized automatically.

5. Movement control: advanced PCC control and ethernet powerlink communication technology is adopted, reducing greatly wiring and imporving the reliability, stability and real time of the system remote control and trouble diagnosis can be achieved via the above control and technology, shortening the maintenance time and reducing the cost to the largest extent.

6. Arrangement mode: the backward pushing arrangement mde is adopted and long sheets can be arranged orderly with low vibration, reducing the orientational permeance of the processing process on silicon steel sheets to the largest extent.

7. Life guarantee: standard components of the device are imported quality ones. High accuracy of processing and assembly of basic components extents the service life of the device to the largest extent.

8. This device is a high techmechanical, optical and electrical integrated product with multiple patented technologies, it represents high manufacture level of domestic transverse shear lines and can substitute imported products, saving much outsourcing fund. Some models have automatic cut in cut become column functions.

Cut To Length Machine,Cut To Length Line Machine,Cut To Length Line,Metal Shearing Machine

JINAN EURO-ASIA MACHINERY CO., LTD , https://www.sdwindingmachine.com