Model NO.: TD-1500
Cooling: Water Cooling
Work Time: 24 Hours Continuously Work
Energy Consumption: Save 30% Electricity
Envionmental: No Pollution
Experience: Over 6 Year Export Experience
Market: Southeast Asia, Middle East, Russia, Europe etc,
Transport Package: Standard Wooden Cases for Packing Induction Heater
Specification: 1.7CBM
Origin: China
HS Code: 8514400090
Model NO.: TD-1500
Cooling: Water Cooling
Work Time: 24 Hours Continuously Work
Energy Consumption: Save 30% Electricity
Envionmental: No Pollution
Experience: Over 6 Year Export Experience
Market: Southeast Asia, Middle East, Russia, Europe etc,
Transport Package: Standard Wooden Cases for Packing Induction Heater
Specification: 1.7CBM
Origin: China
HS Code: 8514400090
Roller shaft quenching CNC induction hardening machine tool

Features of high frequency induction hardening machine
1. IGBT modules, save energy than traditional high frequency tube heater.
2. Protect full.Over current.over voltage,lack of phase,water shortage, etc. more than ten alarm lamps.
3. Heating fast.Within1 second ,temperature rise up to 1200 degree,even higher. 
4. No need contacting work pieces, safety, safe and reliable.
5. Environmental friendly,no pollution, good for worker's health
6. Easy to change induction coils, for heating different shape of steel billet
7. Easy to install and operate.
8. Low maintenance cost
Roller Shaft Quenching CNC Induction Hardening Machine Tool

Technical parameters of induction hardening machine
Model TZP-200
Voltage 320-420V
Input current  6-200A
Oscillation frequency 10-50KHZ
Cooling water pressure 0.3MPA
Generator size/weight 850*600*1330mm/131kg
 
transformer size /weight  780*540*520mm /89kgs
 
Water cooling temperature 
protect point 
below 50 degree 

Roller Shaft Quenching CNC Induction Hardening Machine Tool

CNC quenching induction hardening machine tool has the following features: 

    1, the machine uses PC-industrial digital control systems, high performance, debug and easy to use, to the greatest degree of quenching the workpiece to meet the complex needs. 
    2, the machine can achieve quenching mode: continuous scan quenching, and quenching, sub-continuous scanning quenching (by the level of sub-setting, no limit switch, the same below), while sub-quenching. 
    3, this machine is suitable for the typical artifacts (in the appropriate size range) axis: a variety of shaft, step shaft, gear shaft, cam shaft, axle, the cylindrical disk-type parts, end so on. 
    4, the machine control system for reserve electrical heating and cooling water quenching control interface. According to the process of quenching process and the need to control the cooling process. 
    5, low running costs. Just run the workpiece drive motor 250W, machine power consumption less than one-fifth of machinery and equipment. 
    6, the fuselage structure by profile, low cost, light weight, economical and practical. 
    7, easy maintenance, low failure rate, no leakage. 
    8 high degree of automation and production efficiency. 
    9, rail uses linear bearings, high precision, small friction, long life. 
    10, with heavy equipment through the sprocket, chain balance the weight. 

Roller Shaft Quenching CNC Induction Hardening Machine Tool

Technical parameters of CNC induction hardening machine tool
Model TD-1500
Max .hardening length 1500mm
Max tacital diameter 500mm
workpiece moving speed  mm/s 2-60
rotation speed r/min 30-150mm
tips moving speed  mm/min 480
work piece 150kg
input voltage two phase 380V
Totally motor power 1.5KW
quenching work piece station single


Roller Shaft Quenching CNC Induction Hardening Machine Tool

Applications of induction hardening machine 

:Heat Treatment (surface hardening/quench):
It is mainly aims to change the rigidity of the metal materials through the heat treatment to work pieces. Detail applications are stated as follows:  
1. Hardening for various hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear (orchard shear).
2.Hardening for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, semi drive shaft, small shaft and fork.
3. Various electric tools, such as gear and axes.
4. Hardening for machine tools, such as lathe deck and guide rail.
5. Quench for various hardware metal parts and machined parts, such as shaft, gear (chain wheel), cam, chuck and clamp etc.
6. Quench for hardware molds, such as small-size mold, mold accessory and inner hole of mold.

Customized CNC Hardening machine tool

Roller Shaft Quenching CNC Induction Hardening Machine Tool

FAQ 
1. What's your MOQ?
For now, we have not yet strict policy about the quantity. Any quantity will be OK.
2. Can you send me similar video for my application?
Yes. We have many machine working onsite videos. Such as brazing, forging, hardening, shrink fitting, etc. 
Also according to your your work pieces, we can send you similar video for reference.Sometimes, we can send the same work piece heating video,then,you will see the whole heating or production process.
3. I am new , about this product
It doesn't matter. We have experienced sales and professional engineer , communicated and guide you. We will design and recommend you the suitable machine model (power and frequency, coils). Usually, you just need tell us your work pieces' specifications and heating requirements, or detailed applications.
4. Can you make special coils for my work piece?
Yes. Usually we provide 2 piece of coils, together with the machine.
5. Can we have extra induction coils ?
Yes. We can tailor-made extra coils, if you need. While you only need pay very low cost,factory price.


We offer complete service : 

Before sales
Our professional technical recommend the right machine,and can also customized special machine as customer's requirement and special parts.
Sales following
During machine production, watching the machine quality and testing machine.and take pictures or make video for customer checking.
After Sales
Machine have one year quality warranty ,0ne year free replacement spare parts ( 1 set of spare parts free for your stock, in case it need replacement).
Supply pictures or video help customer to install machine.
Provide long-terms technical support.

Roller Shaft Quenching CNC Induction Hardening Machine Tool
 
Roller shaft quenching CNC induction hardening machine tool

Features of high frequency induction hardening machine
1. IGBT modules, save energy than traditional high frequency tube heater.
2. Protect full.Over current.over voltage,lack of phase,water shortage, etc. more than ten alarm lamps.
3. Heating fast.Within1 second ,temperature rise up to 1200 degree,even higher. 
4. No need contacting work pieces, safety, safe and reliable.
5. Environmental friendly,no pollution, good for worker's health
6. Easy to change induction coils, for heating different shape of steel billet
7. Easy to install and operate.
8. Low maintenance cost
Roller Shaft Quenching CNC Induction Hardening Machine Tool

Technical parameters of induction hardening machine
Model TZP-200
Voltage 320-420V
Input current  6-200A
Oscillation frequency 10-50KHZ
Cooling water pressure 0.3MPA
Generator size/weight 850*600*1330mm/131kg
 
transformer size /weight  780*540*520mm /89kgs
 
Water cooling temperature 
protect point 
below 50 degree 

Roller Shaft Quenching CNC Induction Hardening Machine Tool

CNC quenching induction hardening machine tool has the following features: 

    1, the machine uses PC-industrial digital control systems, high performance, debug and easy to use, to the greatest degree of quenching the workpiece to meet the complex needs. 
    2, the machine can achieve quenching mode: continuous scan quenching, and quenching, sub-continuous scanning quenching (by the level of sub-setting, no limit switch, the same below), while sub-quenching. 
    3, this machine is suitable for the typical artifacts (in the appropriate size range) axis: a variety of shaft, step shaft, gear shaft, cam shaft, axle, the cylindrical disk-type parts, end so on. 
    4, the machine control system for reserve electrical heating and cooling water quenching control interface. According to the process of quenching process and the need to control the cooling process. 
    5, low running costs. Just run the workpiece drive motor 250W, machine power consumption less than one-fifth of machinery and equipment. 
    6, the fuselage structure by profile, low cost, light weight, economical and practical. 
    7, easy maintenance, low failure rate, no leakage. 
    8 high degree of automation and production efficiency. 
    9, rail uses linear bearings, high precision, small friction, long life. 
    10, with heavy equipment through the sprocket, chain balance the weight. 

Roller Shaft Quenching CNC Induction Hardening Machine Tool

Technical parameters of CNC induction hardening machine tool
Model TD-1500
Max .hardening length 1500mm
Max tacital diameter 500mm
workpiece moving speed  mm/s 2-60
rotation speed r/min 30-150mm
tips moving speed  mm/min 480
work piece 150kg
input voltage two phase 380V
Totally motor power 1.5KW
quenching work piece station single


Roller Shaft Quenching CNC Induction Hardening Machine Tool

Applications of induction hardening machine 

:Heat Treatment (surface hardening/quench):
It is mainly aims to change the rigidity of the metal materials through the heat treatment to work pieces. Detail applications are stated as follows:  
1. Hardening for various hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear (orchard shear).
2.Hardening for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, semi drive shaft, small shaft and fork.
3. Various electric tools, such as gear and axes.
4. Hardening for machine tools, such as lathe deck and guide rail.
5. Quench for various hardware metal parts and machined parts, such as shaft, gear (chain wheel), cam, chuck and clamp etc.
6. Quench for hardware molds, such as small-size mold, mold accessory and inner hole of mold.

Customized CNC Hardening machine tool

Roller Shaft Quenching CNC Induction Hardening Machine Tool

FAQ 
1. What's your MOQ?
For now, we have not yet strict policy about the quantity. Any quantity will be OK.
2. Can you send me similar video for my application?
Yes. We have many machine working onsite videos. Such as brazing, forging, hardening, shrink fitting, etc. 
Also according to your your work pieces, we can send you similar video for reference.Sometimes, we can send the same work piece heating video,then,you will see the whole heating or production process.
3. I am new , about this product
It doesn't matter. We have experienced sales and professional engineer , communicated and guide you. We will design and recommend you the suitable machine model (power and frequency, coils). Usually, you just need tell us your work pieces' specifications and heating requirements, or detailed applications.
4. Can you make special coils for my work piece?
Yes. Usually we provide 2 piece of coils, together with the machine.
5. Can we have extra induction coils ?
Yes. We can tailor-made extra coils, if you need. While you only need pay very low cost,factory price.


We offer complete service : 

Before sales
Our professional technical recommend the right machine,and can also customized special machine as customer's requirement and special parts.
Sales following
During machine production, watching the machine quality and testing machine.and take pictures or make video for customer checking.
After Sales
Machine have one year quality warranty ,0ne year free replacement spare parts ( 1 set of spare parts free for your stock, in case it need replacement).
Supply pictures or video help customer to install machine.
Provide long-terms technical support.

Roller Shaft Quenching CNC Induction Hardening Machine Tool
 

UF Powder

Urea-formaldehyde resin (UF), also known as urea-formaldehyde resin, is a polycondensation of urea and formaldehyde under the action of a catalyst (alkaline or acid catalyst) to form an initial urea-formaldehyde resin, and then under the action of a curing agent or auxiliary agent to form an insoluble and insoluble final stage Thermosetting resin. The cured urea-formaldehyde resin is lighter in color than phenolic resin, translucent, resistant to weak acid and alkali, has good insulation performance, excellent wear resistance, and is cheap. It is the most used type of adhesive, especially in the wood processing industry. In the manufacture of various wood-based panels, urea-formaldehyde resin and its modified products account for about 90% of the total amount of adhesives. However, urea-formaldehyde resin is easily decomposed in the presence of strong acid and strong alkali, and has poor weather resistance, poor initial viscosity, large shrinkage, high brittleness, water resistance, and easy aging. The wood-based panels produced with urea-formaldehyde resin have formaldehyde release in the process of manufacturing and use. problem, so it must be modified.

Urea Glue Powder

Uf Powder,Veneer Contact Adhesive,Uf Resin Powder,Hot Melt Adhesive Powder

GUANGZHOU INTERNET WOOD GLUE MANUFACTURER CO. LTD. , https://www.hotmeltadhesiveiwg.com