Paul, a Singaporean merchant in laboratory
equipment sent an e-mail last night, expressing that he would like to
purchase a water chiller to cool laboratory equipment.
The technical parameter of CW-6300: http://Products/ChillerCW63008500Wco.html
CONTACT
S&A
TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE:
teyuchiller
Email:
Website: http://
Angular Contact Ball Bearing,Double Row Angular Contact Ball Bearings,Fag Angular Contact Ball Bearing,Slim Section Bearings UKL Bearing Manufacturing Co., Ltd., , https://www.bearingukl.com
Specific requirements were as follows: 1. the water pressure had better
be 5bar (no less than 3bar), with lift up to 3-18L/min; 2. the cooling
capacity shall reach 3000W at a water temperature of 10℃.
According to Paul`s requirements, S&A recommended two suitable types
of water chillers: one is CW-6200 water chiller with 5100W cooling
capacity, but the cooling capacity of which can only reach 3000W at a
water temperature of 20℃; the other one is CW-6300 water chiller with 8500W cooling capacity, the cooling capacity of
which can reach 5000W at a water temperature of 10℃. (Note: The maximum
lift of S&A water chillers can reach 70L/min)
After comparing relevant data of the two types of water chillers, Paul was more inclined to purchase CW-6300 water chiller with higher cooling capacity.
Thank you so much for your support and trust in S&A. All S&A
water chillers have passed the certification of ISO, CE, RoHS and REACH,
and the warranty period has been extended to 2 years. Our products are
worthy of your trust!
S&A has a perfect laboratory test system to simulate the use
environment of water chillers, conduct high-temperature test and improve
quality continuously, aiming to make you use at ease; and S&A has a
complete material purchasing ecological system and adopts the mode of
mass production, with annual output of 60000 units as a guarantee for
your confidence in us.
The technical parameter of CW-6200: http://Products/ChillerCW62005100Wco.html