Wireless monitoring systems are wireless in many first-time customer perceptions. It is pure wireless. In fact, the wireless monitoring system refers to wireless in this aspect of wireless transmission, not that the whole is wireless. From the camera to our wireless device this section still needs the line to connect. From the receiving end to the video recorder to the display these are all wires to connect.

Now the general monitoring is to use digital cameras, analog monitoring system has been gradually replaced, then the line used to connect is to use ultra-five or six types of network cable, a good cable to ensure the stability of the entire wireless monitoring system. Poor network cables can cause signal attenuation, transmission instability, and image stuck.

With the development of society, wireless surveillance is increasingly applied to all walks of life. We have seen everywhere, roads, farmland, forests, rivers, construction sites, etc. Due to environmental constraints, wireless monitoring has helped them greatly. However, there will still be many questions. Is the transmission stable? Wireless monitoring has developed to today. The technology is very mature. In terms of transmission, the effect is the same as that of cable. The delay is also very small and close to synchronization. Therefore, there is no need to worry about this issue. The key is to choose the right product.

Mutifunction Drilling Rig

Product Description
The water and air dual purpose series drilling rig is a multifunctional drilling rig that integrates water and air drills. This is the first one in China. The drilling rig adopts an AMT manual automatic transmission. Sensitive and convenient switching between positive and negative. Compared with hydraulic transmission, the power consumption is reduced by 35%, making it more efficient and energy-saving. The drilling rig has a fast speed and can be used in conjunction with a Mud Pump to solve the problem of difficult drilling with a soil gas down-hole hammer. The boring machine has high torque and can slide up and down. Deep hole drilling can be used for hard rock layers, gravel layers, and pebble layers below deep wells. Drill with a down-hole hammer. This drilling rig can be professionally engaged in drilling, monitoring wells, geothermal air conditioning drilling, diamond bit wired coring drilling, and engineering geological survey operations.
The main characteristics of the drilling rig:
1. The drilling rig is equipped with a hydraulic drill tower, hydraulic support legs, and a winch, and the power head can slide up and down. Hard rock can be used for DTH hammer drilling.
2. The drilling rig adopts a long stroke dual speed mechanism and mechanical power head, with a power head stroke of 3400mm, which is used to improve drilling efficiency and reduce the occurrence of blockage and burning accidents.
3. The drilling rig adopts dual oil pumps for oil supply. When feeding, a single pump is used, and when lifting the drill pipe, a dual pump combination is used; Low power loss and short auxiliary time.
4. The drilling rig has reserved some functional interfaces in the hydraulic system, which can be expanded according to the process requirements of different users.

Mutifunction Drilling Machine,Multi Purpose Drilling Rig,Multi Function Drilling Machine,Multipurpose Drilling Rig

JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.xitecdrilling.com