The Ministry of Industry and Information Technology issued the “Entry Conditions for the Wood Preservative Industry†on the 27th and pointed out that the newly-built and rebuilt expansion projects must meet the national industrial policies, local industrial development plans, land use plans, and forestry plans. In addition to the production of self-developed new varieties of high-efficiency, low-toxic and environmentally-friendly wood preservatives, in principle, no new wood preservatives production enterprises will be added. The wood preservatives referred to in the “conditions†include wood preservatives and preserved wood. The "Conditions" stipulate that within 2 km of the boundary of the urban planning area, within 1 km of the surrounding areas of schools, residential areas and other enterprises that strictly prevent pollution, and the protection of scenic spots, nature reserves, and drinking water sources as prescribed by the people's governments at and above the county level. It is strictly forbidden to build or expand wood preservation projects in areas that need protection. If the timber anti-corrosion projects that have already been put into operation in the above areas do not meet the access requirements, they shall be rectified within a time limit or withdrawn through "relocation, conversion" or other methods. At the same time, the “conditions†are aligned with the entry requirements, and the production capacity of newly-built and expanded wood preservatives production projects should be no less than 2,000 tons/year, and the newly-established anti-corrosion wood processing projects should have a production capacity of no less than 10,000 cubic meters/year. The production workshop shall be provided with anti-leakage and anti-corrosion treatment. It is also required that liquids containing wood preservatives discharged from pressurized tanks should be recycled, recycled or disposed of. Waste discharges must meet the comprehensive wastewater discharge standards or the environmental standards of the project site. In addition, the "conditions" make it clear that new wood preservatives production projects should enter the chemical park or chemical industry agglomeration area. In addition to the production of self-developed new varieties of high-efficiency, low-toxic and environmentally-friendly wood preservatives, in principle, no new wood preservatives production enterprises will be added. Encourage the existing wood preservatives production enterprises to carry out joint reorganization and support the development of wood preservatives production enterprises with comparative advantages and independent core technologies. Cleaning Agent,Synthetic Flushing Fluid,Heat Transfer System Cleaners,Colorless And Tasteless Cleaning Agent LIAONING ARMCO TECHNICAL LUBRICANTS CO., LTD. , https://www.armcoltherm.com