Continuous fiber-reinforced thermoplastic resin can replace the traditional metal-based materials, and it can be said that it is the hottest technology in the field of automotive light weighting. From the 2013 K2013 show, no fewer than 10 companies exhibited solutions for this technology. The TEPEXdynalite102-RG600(2)/47%-1.0mm Teflon® Nite® Bonded-Laminates Co., Ltd. seat shell manufactured from continuous long glass fiber reinforced thermoplastic composites was first applied to the Opel Astra OPC model, using materials This seat shell has extremely high rigidity and strength, can absorb a large amount of energy in the event of a collision, and thus greatly improves safety. Dr. Christian Obermann, General Manager of Bond-Laminates, said: “The weight of the new product is about 800g lighter than the previous product, and its performance can easily outperform products made of steel and long glass fiber reinforced plastic.†The technical hot spots in China and the impediments that LANXESS expects to use TEPEX's composite materials products will grow. Obermann said: “We have found great potential in other automotive structural components that require excellent load capacity, such as brake pedals, airbag housings, front and rear seat structures, front-end carriers and underbody protection components. So we are now expanding our TIPEX industrial production capacity at our Brilon manufacturing facility." Owens Corning, the world's leading manufacturer of glass reinforced fibers and composite engineering materials, launched the PerforMax series SE4849 Type30 designed for long fiber reinforced thermoplastic polypropylene (LFTPP) to be introduced into the Chinese market at the Chinaplas 2014 exhibition. Direct yarn, suitable for long glass fiber polypropylene resin granulation, continuous fiber melt impregnation, online long glass fiber reinforced thermoplastics and continuous fiber reinforced thermoplastic sheet. The SE4849 achieves faster compound line speeds, increases efficiency and increases fiberglass load. Continuous fiber reinforcement has attracted much attention not only in raw material companies, but also equipment manufacturers have given keen attention to this technology. Leading Injection Technology Providers Arburg, Engel, KraussMaffei, Extrusion Technology Manufacturer BREYER, Milacron Extrusion, Reifenh? User, pressure-shaping technology provider Diffenbacher and detection technology supplier IsraVision exhibited solutions for this technology at K2013. Undoubtedly, continuous fiber reinforcement technology, including other long fiber reinforcement technology, has become an important direction for high performance and lightweight. At the same time, the high price of high-quality materials keeps the cost of light weight increasing a lot. The short-selling of domestic self-owned brands in sales and R&D funds has made it easier for car companies to use modified plastics in automotive applications. Again hate. In the face of increasingly strict automobile fuel consumption regulations, major car companies are looking for ways to reduce fuel consumption, including weight loss for the car body. Through the increase in the amount of modified plastics for automobiles, the weight of the vehicle body is reduced to achieve the purpose of reducing fuel consumption. In Europe, the amount of modified plastics for automobiles has become an important indicator of the level of automotive design and manufacturing. According to statistics, 1kg of modified plastic can replace 2-3kg of steel and other materials with high density, and the car's own weight decreases by 10%. The fuel consumption can be reduced by 6%-8%. Under the premise of ensuring the overall performance of the automobile, increasing the use of plastic materials can effectively reduce the weight of the entire vehicle, reduce vehicle emissions, improve fuel economy, and at the same time reduce the automobile manufacturing cost. The largest amount of auto plastic bicycles in the world is Germany, and the amount of plastics accounts for 15% of the total amount of materials. According to the European level in 2005, the average bicycle usage has reached 13%. However, the current level of bicycle plastics in China is still relatively high from developed countries. The gap has greater potential for improvement. In China, major brands have begun to increase the proportion of various lightweight materials such as alloys, super-strength steels, and engineering plastics in automotive products. Earlier this year, Ford announced the launch of the first light-weight body with the F150. The vehicle’s weight loss was 318 kg. It has recently announced that its SUV model explorers will be the first mass production models to adopt this lightweight design, followed by Sharp and Lincoln. The MKX and other models will also adopt relevant designs. However, compared with foreign brands, domestic self-owned brands have encountered considerable challenges in the lightweight road. As foreign material suppliers almost monopolized the technology in some core components, the purchasing price of independent brands remained high. Although some lightweight materials have obvious weight reduction effects, they are costly. For economic products, the cost of reducing the vehicle weight by one kilogram is controlled within 20 yuan to be an acceptable range. At present, in synthetic plastics, the price of foreign material suppliers is a few thousand dollars more per ton than local materials suppliers, and the average increase in cost per kilogram is tens of yuan. The products of local material suppliers are mainly used in bumpers, fenders, wheel covers, etc. In the supply of lightweight materials such as steering knuckles and chassis suspensions, it is basically used by foreign companies such as Bayer, BASF, and Dupont. monopoly". For example, Bayer's polyurethane composites, polycarbonate plastics can provide materials for windows, new energy lithium batteries, and BASF's long glass fiber materials are mainly used for engine mounts, automotive impact components and other components. With increasingly stringent policies, automakers will face severe challenges in the weak links in the automobile industry chain such as material supply and lightweight design. The sales volume and capital of self-owned brand companies are not superior to foreign investment. Currently, some companies represented by Chery Automobile have begun cooperation with component suppliers, light material suppliers, and car manufacturers. Product advantages: Hotel Lock,Hotel Room Door Locks,Hotel Door Security Latch,Hotel Lock System Dongguan Kaisijin Intelligent Technology Co., Ltd , https://www.dgoemsmartlock.com
1. When guests stay in the store, they only need to register at the front desk, and after completing the procedures, they will get a valid stay time proximity card. The guest can open his room freely when he gets the key with the house number, without having to open the door through the waiter.
2. Guests can rest assured to put their items in the room when they go out, and when guests return to the hotel, they can open the square tongue when they move in the room. At this time, it is safer. The floor attendant cannot open the door lock without the guest's permission (available in unexpected situations) Emergency card opened);
3. The hotel can use the data card to extract the door opening record in the lock and print it out as evidence to judge the authenticity of the accident. The smart card key is a multi-encryption key, which overcomes the characteristics of mechanical keys that are easy to copy and not portable, and is safer and more reliable for the hotel and guests.
4. Scientific and scientific hotel management. There are more than ten types of hotel smart card management systems, with different function cards, which can conveniently implement hotel management and improve the economic benefits of the hotel.
5. People who are away from home will give priority to choosing hotels with good image, sense of security and convenience when staying; smart card door locks can provide guests with the above enjoyment, bringing a continuous source of customers to the hotel, in real life hotels There may be situations where the guest`s stay is overdue and the deposit is insufficient or the room escape fee is maliciously owed, causing both parties to be unhappy or even friction with the guest, which will cause economic losses to the hotel and affect the hotel`s reputation to a certain extent;
6. The "effective stay time" of the smart card door lock can solve this problem well and clear your worries. The smart card key issued to the guest by the smart card electronic lock of our store cannot be copied, and the confidentiality is strong. The guest opens the door by himself without having to go through the floor attendant, which can greatly reduce the staff expenses of the hotel attendant and the corresponding comprehensive expenses.