Kapton Polyimide Tape,Gold Polyimide Film Tape,High Temperature Tap,Polyimide Film Tape Kunshan An De Qing Electric Technology Co., Ltd. , https://www.andeqing.com
China is a big producer of presses Currently, there are about 400 plastics machinery manufacturers in China, most of which are located in the economically developed southeast coast, the Pearl River Delta, and the Yangtze River Delta. In Tibet, Xinjiang, Qinghai, Ningxia, Hainan and other provinces and districts, there are still no plastic machinery manufacturers. At present, China is a big country in the manufacture of plastic machinery. At the same time, it is a big consumer of plastic machinery, but it is not a plastics machinery power.
The reason is that the foundation of China's plastics machinery manufacturing industry is relatively weak. After the founding of New China, from scratch, from small to large, and from weak to strong, it took three historical periods to develop. The plastics machinery in China passed through the period of formation before the 1970s, the growth period of the 1980s, and the development period of the 1990s, and it has so far become a big producer and a big consumer of plastic machinery. In particular, after joining the WTO, China's plastics machinery manufacturers strive to be in line with international standards, actively participate in international competition, implement the "going out" strategy, and meet this historical opportunity and challenge. Among the plastic molding machines, three are the injection molding machine, the extrusion machine, and the blow molding machine. The output and output of the three products respectively account for more than 80% of the total plastic machinery. Among the three major products, injection molding Machines accounted for more than 50%. The 21st century China's plastics machinery industry has become a new force in the machinery industry.
Annual output in the world From the perspective of development speed and major economic indicators, among the more than 190 industries in the machinery industry, plastic machinery is among the best. Today, the annual production capacity of plastic machinery is about 200,000 sets (sets), ranking first in the world. In 2003, the output was about 100,000 sets (sets), of which the output of injection molding machines was 50,000 sets, accounting for about 50% of the total amount of plastics machinery. There were more than 100 injection molding machine manufacturers in Ningbo, including Ningbo Haitian Group Co., Ltd. The company's "Haitian" brand injection molding machine HTF80X ~ HTF3600X, complete series, clamping force 80-4000 tons, injection volume 45-51000 grams, in 2004 the press output exceeded 15,000 units, the output value exceeded 3 billion yuan, exports to The world's more than 30 countries and regions, including Europe, the United States and other developed countries, foreign exchange earning about 200 million US dollars.
According to statistics, from January to April 2005, the output of China's presses was 75,000 units (sets), an increase of 19.05% year-on-year, and it is still at a high-speed growth stage. It is estimated that from 2005 to 2010, the output of China's plastic machinery will reach 150,000-500,000 units respectively. Among them, injection molding machines account for about 35%, extruders 25%, blow molding machines 5%, and other 35%. In terms of exports, injection molding machines accounted for 60.4%, extruders 6.8%, hollow machines 11.7%, and other 21.1%; exports earned 74.1% for injection molding machines, 8.1% for extruders, 8.0% for hollow machines, and 17.8% for other machines.
High-precision equipment still needs to be imported With the continuous expansion of the market capacity of China's plastic machinery, the total amount of imported plastic machinery has not been reduced, and it still accounts for about 50% of the total market capacity. So far, the plastic granulation units in China's large-scale ethylene projects have been relying on imports; precision injection molding machines needed in electronics and communications engineering, large-scale injection molding machines needed in the automotive industry, and large-scale multilayer blow molding machines, packaging A large number of biaxially stretched film production equipment, multi-layer blow molding machines, and precision extruders required in the medical and health field have been widely used in the industry. The reason is that, on the one hand, there is a gap between the level of China's plastics machinery and advanced countries, especially some technical difficulties, such as precision injection molding machines, large-scale granulation units, the domestic can not be produced, the market is urgently needed, really need to import However, on the other hand, the performance and quality of domestically-made equipment are not worse than those of imports, and they can fully meet the requirements and are imported from abroad. To solve this problem, apart from further improving its own development and innovation capabilities, the plastics machinery industry also needs to be further improved in terms of management.
Opportunities and Challenges coexist On the whole, the general plastic machinery products have excess production capacity. Companies that are currently carrying out technological transformations must increase the number of efficient, high-precision equipment and inferred equipment, and strive to improve product development and innovation capabilities.
In addition, in recent years, a prominent feature of the plastics machinery industry is that many well-known enterprises in the world have come to China to build factories.
According to incomplete statistics, foreign companies that have already invested in factories in Jiangsu and Zhejiang include Japan’s Toshiba, Canada’s HUSKY, Japan’s Fanuc, Japan’s Ubeda, Mitsubishi Heavy Industries, Japan’s Sumitomo Heavy Machinery, and Germany’s Demag. In addition, South Korea’s LG, Dongsheng, Japan’s Nissei, and Austria’s Engel are also preparing to invest in factories in China. Foreign companies have taken the Chinese market one after another. Although they will play an active role in the development of China's plastic machinery and base construction, they will also pose serious challenges to domestic plastic machinery manufacturers.
China's plastics machinery manufacturing industry has experienced rapid and sustained growth over the past decade. This point is reflected in the import and export, not only shows that China's plastic machinery in the production of a great increase, but also shows that the domestic plastic machinery in the quality and technology has significantly improved.