Nitrogen Generator For Laser Cutting Nitrogen Generator For Laser Cutting,Purity Output Nitrogen Generator,Psa Nitrogen Generator Laser,Itrogen Generator Laser Cutting Equipment Jiangsu Minnuo Group Co.,Ltd , https://www.mingngroupcn.com
Production Introduction
This CGF Wash-filling-capping 3-in-1unit: Beverage Machinery is used to produce polyester bottled mineral water, purified water, alcoholic beverage machinery and other non-gas beverage machinery. Beverage Machinery can finish all the process such as washing bottle, filling and sealing, it can reduce the materials and Outsiders touch time, improve the sanitary conditions, production capacity and economic efficiency.
The Complete Bottled Mineral Water /Â Pure Water Production Line used in the beverage filling operations. The three functions of bottlewash, fill and seal are composed in one body of the machine. The whole process is automatic.
Washing heads:
The rotary disk is fully made of SUS304 stainless steel.Â
Using imported special efficient spray nozzle, the washing water will be sprayed in a particular angle, can wash any part of the inner wall, rinse with water thoroughly and save flush bottle.
Bottle clamp and lifting mechanism of sliding sleeve adopts Germany Igus corrosion resistant bearing without maintenance.
Washing part moves by a frame in the transmission system through the gear transmission.
Filling Heads
The washing bottle, filling, sealing are connecting with the thumbwheel card bottleneck transportation methods.
The rotating disk is all made of SUS304 stainless.
Filling method is fravity filling.
Filling valve manufactured by SUS304.
The filling valve structure design is reasonable, the filling quantity is accurate.
Capping Heads
The capping machine is the highest precision in 3-in-1 unit machine, on the reliability of equipment operation, has enormous influence on the defective rate of the product.Introduced the world's most advanced Italian AROL capping machine technology, combining with the filling machine production experience improvement, and ask college of Shanghai Jiao Tong university mechanical engineering institute of electrical and mechanical design and automation technology of experts and professors to help design.Â
Automatic PET bottle Mineral water bottling machine /filling packaging lineÂ
Main Features
1. Using the wind sent access and move wheel in the bottle directly connected technology; canceled screw and conveyor chains, this enable the change the bottle-shaped become easier.Â
2. Bottles transmission adopt clip bottleneck technology, bottle-shaped transform not need to adjust the equipment level, only change related the curved plate, wheel and nylon parts is enough..Â
3. The specially designed stainless steel bottle washing machine clip is solid and durable, no touch with the screw location of bottle mouth to avoid secondary pollution.Â
4. High-speed large gravity flow valve filling valve, filling fast, filling accurate and no liquid lose.Â
5. Spiraling decline when output bottle, transform bottle shape no need to adjust the height of conveyor chains.Â
6. Host adopt advanced PLC automatic control technology, the key electrical components from famous company such as Japan's Mitsubishi, France Schneider, OMRON.
More models
Washing, filling, capping heads
8-8-3
18-18-6
24-24-6
32-32-8
Capacity based on 500ml
2000-3000 BPH
5000-7000 BPH
8000-12000 BPH
12000-15000 BPH
Applicable bottle
H=170-320, Φ=50-100, (330∼2000ml)
PressureÂ
0.25-0.3 MPA
General powerÂ
1.5+0.37 KW
2.2+0.37 KW
3+0.45+0.25 KW
4+0.45+0.25 KW
Overall dimension
2300×1680×2650
2500×1760×2650
3100×2100×2650
3800×2800×2650
Weight
2600 KG
3500 KG
4800 KG
6500 KG
Complete water filling machine line chart:
OUR COMPANY:
Automatic PET bottle Mineral water bottling machine /filling packaging lineÂ
Zhangjiagang U Tech Machine Co., Ltd. is a manufacturer of filling machine and packing with well-equipped testing facilities and strong technical force. With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in beverage and other packing equipment.
 Our products include: liquid filling machines (water, fruit juice/tea, carbonated drink, oil, alcohol, plant protein drink, etc.), barreled filling line (3-5 gallon) water treatment machines, labeling & packing machines, semi-automatic /full automatic PET bottle blowing machines, and injection molding machines, conveyor belts.
Â
OUR SERVICES:
Automatic PET bottle Mineral water bottling machine /filling packaging lineÂ
What service UÂ Tech Machine Co.,Ltd can offer you ?Â
1.Well-trained & experienced staff are to answer all your inquiries in English and Chinese
2.24 hours for engineer response (all services part 5days in customer hand by Intl' courier).
3. 2 Years guarantee
4.Your business relationship with us will be confidential to any third party.
5. Good after-sle service offered, please get back to us if you got any questions.
 FAQ:
Automatic PET bottle Mineral water bottling machine /filling packaging lineÂ
Q1:Are you a trading company or a manufactory?
A1:We are a manufactory,can give u best service .
Â
Q2:What's your guarantee or the warranty of the quality if we buy your machines?
A2:We offer you high quality machines with 2 years guarantee . we will give u spare part free in 2 years
Â
Q3:When can I get my machine after I paid?
A3:We will deliver the machines on time as the date we agreed both side.
Â
Q4:How can I install my machine when it arrives?
A4:We will send our engineer to your side as soon as you get all your machines ready , for testing and teaching your technicians how to run the machines.
Â
Q5:How about the spare parts?
A5:After we deal down all the things , we will offer you a spare parts list for your reference.
Â
 Any more questions, please feel free to contact us!
 Â
                         Welcome To Visit Zhangjiagang U Tech Machine Co.,Ltd!
 Â
Automatic PET bottle Mineral water bottling machine /filling packaging lineÂ
Production Introduction
This CGF Wash-filling-capping 3-in-1unit: Beverage Machinery is used to produce polyester bottled mineral water, purified water, alcoholic beverage machinery and other non-gas beverage machinery. Beverage Machinery can finish all the process such as washing bottle, filling and sealing, it can reduce the materials and Outsiders touch time, improve the sanitary conditions, production capacity and economic efficiency.
The Complete Bottled Mineral Water /Â Pure Water Production Line used in the beverage filling operations. The three functions of bottlewash, fill and seal are composed in one body of the machine. The whole process is automatic.
Washing heads:
The rotary disk is fully made of SUS304 stainless steel.Â
Using imported special efficient spray nozzle, the washing water will be sprayed in a particular angle, can wash any part of the inner wall, rinse with water thoroughly and save flush bottle.
Bottle clamp and lifting mechanism of sliding sleeve adopts Germany Igus corrosion resistant bearing without maintenance.
Washing part moves by a frame in the transmission system through the gear transmission.
Filling Heads
The washing bottle, filling, sealing are connecting with the thumbwheel card bottleneck transportation methods.
The rotating disk is all made of SUS304 stainless.
Filling method is fravity filling.
Filling valve manufactured by SUS304.
The filling valve structure design is reasonable, the filling quantity is accurate.
Capping Heads
The capping machine is the highest precision in 3-in-1 unit machine, on the reliability of equipment operation, has enormous influence on the defective rate of the product.Introduced the world's most advanced Italian AROL capping machine technology, combining with the filling machine production experience improvement, and ask college of Shanghai Jiao Tong university mechanical engineering institute of electrical and mechanical design and automation technology of experts and professors to help design.Â
Automatic PET bottle Mineral water bottling machine /filling packaging lineÂ
Main Features
1. Using the wind sent access and move wheel in the bottle directly connected technology; canceled screw and conveyor chains, this enable the change the bottle-shaped become easier.Â
2. Bottles transmission adopt clip bottleneck technology, bottle-shaped transform not need to adjust the equipment level, only change related the curved plate, wheel and nylon parts is enough..Â
3. The specially designed stainless steel bottle washing machine clip is solid and durable, no touch with the screw location of bottle mouth to avoid secondary pollution.Â
4. High-speed large gravity flow valve filling valve, filling fast, filling accurate and no liquid lose.Â
5. Spiraling decline when output bottle, transform bottle shape no need to adjust the height of conveyor chains.Â
6. Host adopt advanced PLC automatic control technology, the key electrical components from famous company such as Japan's Mitsubishi, France Schneider, OMRON.
More models
Washing, filling, capping heads
8-8-3
18-18-6
24-24-6
32-32-8
Capacity based on 500ml
2000-3000 BPH
5000-7000 BPH
8000-12000 BPH
12000-15000 BPH
Applicable bottle
H=170-320, Φ=50-100, (330∼2000ml)
PressureÂ
0.25-0.3 MPA
General powerÂ
1.5+0.37 KW
2.2+0.37 KW
3+0.45+0.25 KW
4+0.45+0.25 KW
Overall dimension
2300×1680×2650
2500×1760×2650
3100×2100×2650
3800×2800×2650
Weight
2600 KG
3500 KG
4800 KG
6500 KG
Complete water filling machine line chart:
OUR COMPANY:
Automatic PET bottle Mineral water bottling machine /filling packaging lineÂ
Zhangjiagang U Tech Machine Co., Ltd. is a manufacturer of filling machine and packing with well-equipped testing facilities and strong technical force. With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in beverage and other packing equipment.
 Our products include: liquid filling machines (water, fruit juice/tea, carbonated drink, oil, alcohol, plant protein drink, etc.), barreled filling line (3-5 gallon) water treatment machines, labeling & packing machines, semi-automatic /full automatic PET bottle blowing machines, and injection molding machines, conveyor belts.
Â
OUR SERVICES:
Automatic PET bottle Mineral water bottling machine /filling packaging lineÂ
What service UÂ Tech Machine Co.,Ltd can offer you ?Â
1.Well-trained & experienced staff are to answer all your inquiries in English and Chinese
2.24 hours for engineer response (all services part 5days in customer hand by Intl' courier).
3. 2 Years guarantee
4.Your business relationship with us will be confidential to any third party.
5. Good after-sle service offered, please get back to us if you got any questions.
 FAQ:
Automatic PET bottle Mineral water bottling machine /filling packaging lineÂ
Q1:Are you a trading company or a manufactory?
A1:We are a manufactory,can give u best service .
Â
Q2:What's your guarantee or the warranty of the quality if we buy your machines?
A2:We offer you high quality machines with 2 years guarantee . we will give u spare part free in 2 years
Â
Q3:When can I get my machine after I paid?
A3:We will deliver the machines on time as the date we agreed both side.
Â
Q4:How can I install my machine when it arrives?
A4:We will send our engineer to your side as soon as you get all your machines ready , for testing and teaching your technicians how to run the machines.
Â
Q5:How about the spare parts?
A5:After we deal down all the things , we will offer you a spare parts list for your reference.
Â
 Any more questions, please feel free to contact us!
 Â
                         Welcome To Visit Zhangjiagang U Tech Machine Co.,Ltd!
 Â
Name: Water Bottling Filling Packaging Machine
Suit Bottle: 330ml-2L
Material: SUS304/316
Control: PLC+Touch Screen
Warranty: 2 Years
Pressure: 0.25-0.3 MPa
Weight: 3500 Kg
Trademark: U TECH
Transport Package: Wooden Case
Origin: Zhangjiagang
HS Code: 8422303090
Name: Water Bottling Filling Packaging Machine
Suit Bottle: 330ml-2L
Material: SUS304/316
Control: PLC+Touch Screen
Warranty: 2 Years
Pressure: 0.25-0.3 MPa
Weight: 3500 Kg
Trademark: U TECH
Transport Package: Wooden Case
Origin: Zhangjiagang
HS Code: 8422303090
Automatic PET bottle Mineral water bottling machine /filling packaging lineÂ