Orange Peel Textured L Acrylic Sheet,Orange Peel Textured Acrylic Sheet,Stipple Acrylic Sheet,Orange Peel Textured Acrylic Plate Jiangmen Kunxin new Material Technology Co.,Ltd , https://www.plasticsjmkunxin.com
Â
Magnetic Separator is suitable for Mine, Coal preparation plant etc. use weak wet magnetic field to sort out the strong magnetic ore, or eliminating the strong magnetic minerals mixed in nonmagnetic minerals. The magnetic field of CTS(N,B) wet drum permanent magnetic separators divide into rotary and fixed. The fixed one is mainly use in weak magnetic field to separate the fine particle strong magnetic materials, or eliminating the strong magnetic materials in the nonmagnetic ores.
The machine's magnetic system, using high quality ferrite material or compound is made with rare earth magnets, drum table the average magnetic flux density of 100 ~ 600mT. The separator has a simple structure, large capacity, easy to operate, easy to maintain. The structural characteristics of magnetic separator: Wet permanent magnet drum magnetic separator is mainly composed of a cylinder, magnetic system, tank, transmission of four parts. 2-3mm cylinder made of stainless steel plate welded into a tube, cast aluminum cover member connected with stainless steel screws and barrel. Motor through reducer, drive cylinder rotary movement. Magnetic system for the open magnetic system, installed in the cylinder. Magnetic blocks with stainless steel bolts installed on the floor of the yoke, the yoke shaft extending cylinder, the shaft is fixed crank arm. Pulling the crank arm can adjust the angle of the magnetic system, adjustments can be fixed with a rod after appropriate. Work area with stainless steel tank manufacturing, racks and other parts of the tank with ordinary steel welding.
Magnetic Separator Features
1, poor iron by roughing rough broken or broken after exclusion of surrounding rock and other waste rock, improve quality, reduce the load on the next process.
2 for hematite reduction roasting operation will be closed not fully restored ore sorting, and then returned fire.
3, for the ceramic industry in the porcelain clay mixed in iron removed to improve the quality of ceramic products.
4, burning coal, foundry sand, refractory materials required, and other lines to the iron work.
Specification
Â
Type
(wet separator)
drum
diameter
(mm)
drum
length
(mm)
Magnetic intensity(Gauss)
Rotating speed(r/min)
Capacity (T/H)
Motor Power(kw)
CTB-609
600
900
≥1500
35
8-15
>100
CTB-612
600
1200
≥1500
35
10-20
>100
CTB-618
600
1800
≥1500
35
15-30
>100
CTB-718
700
1800
≥1500
28.6
20-45
>100
CTB-918
900
1800
≥1500
25.6
25-55
>100
CTB-921
900
2100
≥1500
25.6
30-60
>100
CTB-924
900
2400
≥1500
25.6
35-70
100~150
CTB-1018
1050
1800
≥1500
22
40-75
150~200
CTB-1024
1050
2400
≥1500
22
52-100
200
CTB-1030
1050
3000
≥1500
22
65-125
200
CTB-1224
1200
2400
≥1500
20
58-110
150~200
CTB-1230
1200
3000
≥1500
20
70-140
150~200
Dry separator
Â
Â
Â
Â
Â
Â
CTB-9018
900
1800
≥2000-5000
25
40-60
200
CTB-9024
900
2400
≥2000-5000
25
50-80
200
CTB-1021
1050
2100
≥2000-5000
25
60-100
200
CTB-1024
1050
2400
≥2000-5000
21
80-120
200
CTB-1030
1050
3000
≥2000-5000
21
90-130
200
CTB-1224
1200
2400
≥2000-5000
21
100-150
300
This product is ideally suited for arid areas, for it can save water resources, and reduce dressing costs, opening up a new way for magnetite mining. This product is also can be driven by diesel engine, it is also available in power shortage areas. In addition to the existing styling products, we can also develop different magnetic separators according to user-specific demands on different magnetic induction and the application of different magnetic materials. These series of products can meet the needs of small, medium and large mining processing plant, welcome to negotiate business. Our company offers industrial prototype, can provide users with a small test.
Â
CTB wet drum iron sand magnetic separator is usually used for sorting the fine-grained strong magnetic minerals, or removing strong magnetic minerals from non-magnetic minerals. With a deep magnetic field, the machine can make a continuous row of ore feeding and discharge. It also has enough working clearance and high processing capabilities.
This product is ideally suited for arid areas, for it can save water resources, and reduce dressing costs, opening up a new way for magnetite mining. This product is also can be driven by diesel engine, it is also available in power shortage areas. In addition to the existing styling products, we can also develop different magnetic separators according to user-specific demands on different magnetic induction and the application of different magnetic materials. These series of products can meet the needs of small, medium and large mining processing plant, welcome to negotiate business. Our company offers industrial prototype, can provide users with a small test.
Â
CTB wet drum iron sand magnetic separator is usually used for sorting the fine-grained strong magnetic minerals, or removing strong magnetic minerals from non-magnetic minerals. With a deep magnetic field, the machine can make a continuous row of ore feeding and discharge. It also has enough working clearance and high processing capabilities.
Features:
1. The magnetic system adopts quality ferrite material and NdFeB magnet.
2. The average magnetic induction of the drum surface is about 100 ~ 600 mT.
3. Downstream tank, half upstream tank, upstream tank or double-drum type can be available.
4. Simple structure, large handling capacity, convenient operation and easy maintenance.
Working principle:
When the ore pulp folw into the magnetic field, the strong magnetic minerals are adsorbed on the surface of the drum. The weak magnetic and non-magnetic minerals are cast off and discharged, while the strong magnetic minerals on the surface of the drum rotate with the drum and will be brought out of magnetic field to complete the sorting operation.
Â
Â
Magnetic Separator is suitable for Mine, Coal preparation plant etc. use weak wet magnetic field to sort out the strong magnetic ore, or eliminating the strong magnetic minerals mixed in nonmagnetic minerals. The magnetic field of CTS(N,B) wet drum permanent magnetic separators divide into rotary and fixed. The fixed one is mainly use in weak magnetic field to separate the fine particle strong magnetic materials, or eliminating the strong magnetic materials in the nonmagnetic ores.
The machine's magnetic system, using high quality ferrite material or compound is made with rare earth magnets, drum table the average magnetic flux density of 100 ~ 600mT. The separator has a simple structure, large capacity, easy to operate, easy to maintain. The structural characteristics of magnetic separator: Wet permanent magnet drum magnetic separator is mainly composed of a cylinder, magnetic system, tank, transmission of four parts. 2-3mm cylinder made of stainless steel plate welded into a tube, cast aluminum cover member connected with stainless steel screws and barrel. Motor through reducer, drive cylinder rotary movement. Magnetic system for the open magnetic system, installed in the cylinder. Magnetic blocks with stainless steel bolts installed on the floor of the yoke, the yoke shaft extending cylinder, the shaft is fixed crank arm. Pulling the crank arm can adjust the angle of the magnetic system, adjustments can be fixed with a rod after appropriate. Work area with stainless steel tank manufacturing, racks and other parts of the tank with ordinary steel welding.
Magnetic Separator Features
1, poor iron by roughing rough broken or broken after exclusion of surrounding rock and other waste rock, improve quality, reduce the load on the next process.
2 for hematite reduction roasting operation will be closed not fully restored ore sorting, and then returned fire.
3, for the ceramic industry in the porcelain clay mixed in iron removed to improve the quality of ceramic products.
4, burning coal, foundry sand, refractory materials required, and other lines to the iron work.
Specification
Â
Type
(wet separator)
drum
diameter
(mm)
drum
length
(mm)
Magnetic intensity(Gauss)
Rotating speed(r/min)
Capacity (T/H)
Motor Power(kw)
CTB-609
600
900
≥1500
35
8-15
>100
CTB-612
600
1200
≥1500
35
10-20
>100
CTB-618
600
1800
≥1500
35
15-30
>100
CTB-718
700
1800
≥1500
28.6
20-45
>100
CTB-918
900
1800
≥1500
25.6
25-55
>100
CTB-921
900
2100
≥1500
25.6
30-60
>100
CTB-924
900
2400
≥1500
25.6
35-70
100~150
CTB-Orange Peel Textured L Acrylic Sheet
Model NO.: CTB
Energy Saving: Energy Saving
Warranty: 5 Years
Color: Green
Customized: Customized
Condition: New
Model: CTB-612
The Maximum Feed Size: 1-20mm
Trademark: HSDC
Transport Package: Plastic Film
Specification: CTB-612
Origin: Tangshan
HS Code: 85051190
Model NO.: CTB
Energy Saving: Energy Saving
Warranty: 5 Years
Color: Green
Customized: Customized
Condition: New
Model: CTB-612
The Maximum Feed Size: 1-20mm
Trademark: HSDC
Transport Package: Plastic Film
Specification: CTB-612
Origin: Tangshan
HS Code: 85051190