The first three quarters of 2017 have passed. Entering the annual sales season of “golden nine silver and ten silver”, the car manufacturers’ sales volume has climbed to new heights and ushered in a bumper sales season.

According to the latest data released by the CLUCC, in September 2017, the sales volume of China's narrow passenger vehicles reached 2.302 million, an increase of 3.6% year-on-year and 24.3% month-on-month. From January to September this year, the cumulative sales of narrow-sale passenger vehicles reached 16.748 million. Vehicles, an increase of 3.2% over the same period last year. In terms of retail sales, a total of 2.195 million narrow-sale passenger vehicles were sold in July, a month-on-month increase of 17.3%, and a year-on-year increase of 1.2%. It can be seen that the "Jin 9" automobile market has entered a warming trend.

In the "Golden September" peak season, looking at the performance of major car companies, several families were happy and worried. Specifically, in the statistics of more than 70 car companies across the country, Huatai, Dongfeng Renault and many other companies have increased by more than 100% year-on-year. In addition, Changhe Suzuki, Guangzhou Automobile Mitsubishi, BYD Daimler and Fuqi Qiteng have also seen rapid growth. . In this achievement, the sales of new energy companies are remarkable, such as the sales of BAIC new energy reached 9143, the Han Teng Automotive reached 5138, and the Zhidou Electric reached 5084. However, there are also some car companies this month, the performance is not very satisfactory, for example, Beijing Auto dropped sharply from last year's 45,668 to 17,915 vehicles, while JAC's decline reached 50.08%...

As for the specific situation, Gasgoo has carried out comprehensive statistics according to the official data of the association and automobile enterprises, and compiled it as follows:

Passenger car sales volume TOP15: SAIC Volkswagen ranked first, Dongfeng Honda fell out of the top ten

整车销量,乘用车销量,销量,9月乘用车销量

From the perspective of total passenger vehicle sales TOP15, SAIC Volkswagen performed well this month in the top three, leaping to the top with a sales volume of 219,000 units, a year-on-year increase of 22.4%. FAW-Volkswagen retreated to second place with an increase of 15.3% year-on-year. SAIC GM's performance was still steady and continued to rank third. Although Geely has achieved remarkable sales with a sales volume of 109,000 units and a 41.9% YoY increase, Dongfeng Nissan still beat Geely in the top five with a slight advantage of 110,000 units. Apart from SAIC Volkswagen and Geely, Dongfeng Honda, FAW Toyota, SAIC Passenger Vehicle and Guangzhou Automobile Chuanxi have performed well in this month's mainstream auto companies, with an increase of more than 20%.

While cheering for the above-mentioned car companies, we also saw that Changan Automobile, Beijing Hyundai and Changan Ford continued to decline, but the decline has been reduced in the sales season. Among them, the cumulative sales of Beijing Hyundai and Chang'an Ford from January to September were 489,000 units and 577,000 units, respectively. The target set at the beginning of the year was only half of the target but it was already in sight at the end of the year. The pressure on the two companies is still not small.

Autonomous car companies: Geely is number one, Great Wall and Zhongtai grow steadily

整车销量,乘用车销量,销量,9月乘用车销量

Judging from the independent car prices, Geely continued to sit firmly on its own championship, gaining 41.9% compared to the same period of last year, reaching 108,980 vehicles, which sold about 11,000 cars more than Changan Automobile, which ranked second. Great Wall Motors held its third seat in September with 90,720 sales. Compared with the situation in which Changan declined compared to the same period last year, the Great Wall increased by 0.7% from the same period last year after a slight increase in negative growth of 0.7% in the previous month. In September, the cumulative sales of the Great Wall branded “WEY” VV7 and VV5 exceeded 10,000 units. The mark reached 12,013 vehicles, becoming a new force to help increase sales in the city. The new member of the Haval SUV family, the M6, has grown steadily and sold 6,790 new cars, which also strongly contributed to the strong growth in sales of the Great Wall.

In addition to the Autonomous Three, Zotye Automobile achieved a breakthrough in sales and changed its negative growth rate compared to the same period of last year, which represented an increase of 8.4% year-on-year to 32,978 units, an increase of 43% from the previous month. This month it also rose one place higher. Seventh place. In addition, sales of SAIC Passenger Vehicle, Guangzhou Automobile Group, and Southeast Automotive Group performed well. Among them, SAIC Passenger Vehicles sold 50,028 units in September, an increase of 41.7% year-on-year. Southeast Motor's September sales doubled in the same period last year, an increase of 53.1% to 16,129 vehicles. At the same time as the above-mentioned car companies achieved a bumper sales volume, we also noticed that some car companies such as Chery, BYD, Dongfeng Xiaokang, Jianghuai, and Beijing Automobiles have continued to decline.

Joint venture car companies: Changan Ford continues to fall, and the Korean law system is warming up

整车销量,乘用车销量,销量,9月乘用车销量

Judging from the TOP15 joint-venture passenger car sales, Chang An Ford, Beijing Hyundai Motors, Shenlong Motors, and Dongfeng Yueda Kia Motors have continued to decline year-on-year. However, it is worth noting that, after experiencing severe winter sales for the most part of the year, sales of the Korean car segment in September have achieved breakthroughs, among which, Beijing Hyundai’s September sales exceeded 85,000 vehicles, accompanied by a 60.4% sequential increase, and its year-on-year decline was from August’s. 35.4% fell to 18.4% in September; Dongfeng Yueda Kia sold more than 40,000 vehicles in September, a sharp jump of 73.9% from the previous quarter, and the year-on-year decline also decreased from 45.4% in August to 27.3% in September. The increase in Korean car sales was mainly attributable to the sales of traditional car sales and price cuts. Sales of legal vehicles represented by Shenlong Motor Co., Ltd. also rebounded. In September, sales of Shenlong Motors also exceeded 40,000, a significant increase of 52.8% from the previous quarter, and the year-on-year decline was reduced from 31.8% in August to 18.0% in September. Although Changan Ford's decline dropped to 13.2% year-on-year, it still maintained a growth rate of 18.8%.

In terms of growth, compared with the same period of last year, SAIC Volkswagen, FAW Toyota, and Beijing Benz increased their growth rates. SAIC Volkswagen and FAW Toyota increased by 22.4% and 24.1% respectively. SAIC Volkswagen also saw a huge jump of 43.9% from the previous month. Ranked first, while the increase in Wuling, Dongfeng Nissan, Dongfeng Honda, Guangzhou Automobile Honda and GAC Toyota all declined, FAW-Volkswagen, SAIC GM, BMW Brilliance little change.

The first three quarters of 2017 have passed and there are only three months from the year-end assessment. For some companies, can they seize the opportunity to successfully complete the counterattack? Specifically, Gasgo Motors will continue to report on it, so stay tuned!




Computer Numeric Control (CNC) is the automation of machine tools that are operated by precisely programmed commands encoded on a storage medium (computer command module, usually located on the device, see picture right-->) as opposed to controlled manually by hand wheels or levers, or mechanically automated by cams alone. Most NC today is computer (or computerized) numerical control (CNC), in which computers play an integral part of the control.

We develop the Cnc Stainless Steel Parts

Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high-salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required.

Stainless steel differs from carbon steel by the amount of chromium present. Unprotected carbon steel rusts readily when exposed to air and moisture. This iron oxide film (the rust) is active and accelerates corrosion by forming more iron oxide; and, because of the greater volume of the iron oxide, this tends to flake and fall away. Stainless steels contain sufficient chromium to form a passive film of chromium oxide, which prevents further surface corrosion by blocking oxygen diffusion to the steel surface and blocks corrosion from spreading into the metal's internal structure. Passivation occurs only if the proportion of chromium is high enough and oxygen is present.

B. Main particulars

MAIN PARTICULARS

Material

Stainless steel(201,304,316-)

Standard

ASTM, ASME, DIN, JIS, ISO, BS, API, EN

Certificate

ISO9001

Tolerance

Up to +/- 0.002mm

Dimension

As per drawing, as large as we can

Processing

CNC turning, CNC turning and milling compound processing, 3/4/5 axis CNC machining center, wire-cutting, EDM, grinding etc.

Finishing surface

Machined surface with oil, blasting and painting, anodize, polishing, powder painting, electrophoretic coating-

Marking

as per clients` requirements

Inspection

material, construction, dimension, heat treatment, hardness, NDT

Quality

ISO9001, PPAP control production

Lead time

3-20 days for sample, consult with customer for mass production

Delivery

Express for sample, ocean shipping/air for mass production

Our Capabilities

CNC machining, CNC center machining, drilling, milling, turning, grinding, tapping, boring

Engineering & manufacturing services

R&D process, tooling and gauging design, product design

Integrated CAD/CAM system, test and measuring

Others

Recyclable, in line with environmental requirements and standards, and reliable


C. Construction

Construction by machining


D Workmanship

The workmanship have good production practice. Care are taken to ensure High accuracy and smooth surfaces 

E. Certificates

- Material certificates

- Measuring reports

- Inspection protocol

- NDT reports

- Fixed certificate: ISO9001 certificate


Our service

Besides above the general specifications, we can also supply some specific machining parts as clients' requirements.

 

Package and shipping

Export cartons, pallets, wooden cases, Polybags

container package and container transportation




Steel Machining Parts

Steel Machining Parts,Precision Cnc Metal Machining,Stainless Steel Machine Parts,Cnc Metal Machining

Shinvast Industry Ltd , http://www.shinvastindustry.com